Uses of Class
org.geotoolkit.referencing.AbstractIdentifiedObject

Packages that use AbstractIdentifiedObject

org.geotoolkit.parameter	Parameter implementations.
org.geotoolkit.referencing	Reference system implementations.
org.geotoolkit.referencing.crs	Coordinate reference system implementations.
org.geotoolkit.referencing.cs	Coordinate system implementations.
org.geotoolkit.referencing.datum	Datum implementations.
org.geotoolkit.referencing.operation	Coordinate operation implementations.
org.geotoolkit.referencing.operation.provider	Math transforms providers, including map projections.

Uses of AbstractIdentifiedObject in org.geotoolkit.parameter

Subclasses of AbstractIdentifiedObject in org.geotoolkit.parameter

class	AbstractParameterDescriptor Abstract definition of a parameter or group of parameters used by an operation method.
class	DefaultParameterDescriptor<T> The definition of a parameter used by an operation method.
class	DefaultParameterDescriptorGroup The definition of a group of related parameters used by an operation method.
class	MatrixParameterDescriptors A parameter group for matrix elements.

Uses of AbstractIdentifiedObject in org.geotoolkit.referencing

Subclasses of AbstractIdentifiedObject in org.geotoolkit.referencing

class

AbstractReferenceSystem Description of a spatial and temporal reference system used by a dataset.

Uses of AbstractIdentifiedObject in org.geotoolkit.referencing.crs

Subclasses of AbstractIdentifiedObject in org.geotoolkit.referencing.crs

class	AbstractCRS Abstract coordinate reference system, usually defined by a coordinate system and a datum.
class	AbstractDerivedCRS A coordinate reference system that is defined by its coordinate conversion from another CRS (not by a datum).
class	AbstractSingleCRS Abstract coordinate reference system, consisting of a single coordinate system and a single datum (as opposed to compound CRS).
class	DefaultCompoundCRS A coordinate reference system describing the position of points through two or more independent coordinate reference systems.
class	DefaultDerivedCRS A coordinate reference system that is defined by its coordinate conversion from another CRS but is not a projected CRS.
class	DefaultEngineeringCRS A contextually local coordinate reference system.
class	DefaultGeocentricCRS A 3D coordinate reference system with the origin at the approximate centre of mass of the earth.
class	DefaultGeographicCRS A coordinate reference system based on an ellipsoidal approximation of the geoid; this provides an accurate representation of the geometry of geographic features for a large portion of the earth's surface.
class	DefaultImageCRS An engineering coordinate reference system applied to locations in images.
class	DefaultProjectedCRS A 2D coordinate reference system used to approximate the shape of the earth on a planar surface.
class	DefaultTemporalCRS A 1D coordinate reference system used for the recording of time.
class	DefaultVerticalCRS A 1D coordinate reference system used for recording heights or depths.

Uses of AbstractIdentifiedObject in org.geotoolkit.referencing.cs

Subclasses of AbstractIdentifiedObject in org.geotoolkit.referencing.cs

class	AbstractCS The set of coordinate system axes that spans a given coordinate space.
class	DefaultAffineCS A two- or three-dimensional coordinate system with straight axes that are not necessarily orthogonal.
class	DefaultCartesianCS A 1-, 2-, or 3-dimensional coordinate system.
class	DefaultCompoundCS A coordinate system made of two or more independent coordinate systems.
class	DefaultCoordinateSystemAxis Definition of a coordinate system axis.
class	DefaultCylindricalCS A three-dimensional coordinate system consisting of a polar coordinate system extended by a straight coordinate axis perpendicular to the plane spanned by the polar coordinate system.
class	DefaultEllipsoidalCS A two- or three-dimensional coordinate system in which position is specified by geodetic latitude, geodetic longitude, and (in the three-dimensional case) ellipsoidal height.
class	DefaultLinearCS A one-dimensional coordinate system that consists of the points that lie on the single axis described.
class	DefaultPolarCS A two-dimensional coordinate system in which position is specified by the distance from the origin and the angle between the line from the origin to a point and a reference direction.
class	DefaultSphericalCS A three-dimensional coordinate system with one distance measured from the origin and two angular coordinates.
class	DefaultTimeCS A one-dimensional coordinate system containing a single time axis, used to describe the temporal position of a point in the specified time units from a specified time origin.
class	DefaultUserDefinedCS A two- or three-dimensional coordinate system that consists of any combination of coordinate axes not covered by any other Coordinate System type.
class	DefaultVerticalCS A one-dimensional coordinate system used to record the heights (or depths) of points.

Uses of AbstractIdentifiedObject in org.geotoolkit.referencing.datum

Subclasses of AbstractIdentifiedObject in org.geotoolkit.referencing.datum

class	AbstractDatum Specifies the relationship of a coordinate system to the earth, thus creating a coordinate reference system.
class	DefaultEllipsoid Geometric figure that can be used to describe the approximate shape of the earth.
class	DefaultEngineeringDatum Defines the origin of an engineering coordinate reference system.
class	DefaultGeodeticDatum Defines the location and precise orientation in 3-dimensional space of a defined ellipsoid (or sphere) that approximates the shape of the earth.
class	DefaultImageDatum Defines the origin of an image coordinate reference system.
class	DefaultPrimeMeridian A prime meridian defines the origin from which longitude values are determined.
class	DefaultTemporalDatum A temporal datum defines the origin of a temporal coordinate reference system.
class	DefaultVerticalDatum A textual description and/or a set of parameters identifying a particular reference level surface used as a zero-height surface.

Uses of AbstractIdentifiedObject in org.geotoolkit.referencing.operation

Subclasses of AbstractIdentifiedObject in org.geotoolkit.referencing.operation

class	AbstractCoordinateOperation Establishes an association between a source and a target coordinate reference system, and provides a transform for transforming coordinates in the source CRS to coordinates in the target CRS.
class	DefaultConcatenatedOperation An ordered sequence of two or more single coordinate operations.
class	DefaultConicProjection Base class for conical map projections.
class	DefaultConversion An operation on coordinates that does not include any change of Datum.
class	DefaultCylindricalProjection Base class for cylindrical map projections.
class	DefaultOperationMethod Definition of an algorithm used to perform a coordinate operation.
class	DefaultPassThroughOperation A pass-through operation specifies that a subset of a coordinate tuple is subject to a specific coordinate operation.
class	DefaultPlanarProjection Base class for for azimuthal (or planar) map projections.
class	DefaultProjection A conversion transforming (longitude,latitude) coordinates to Cartesian coordinates (x,y).
class	DefaultSingleOperation A parameterized mathematical operation on coordinates that transforms or converts coordinates to another coordinate reference system.
class	DefaultTransformation An operation on coordinates that usually includes a change of Datum.
class	DefiningConversion A conversion used for the definition of a derived CRS (including projections).
class	MathTransformProvider An operation method capable to create a math transform from set of parameter values.

Uses of AbstractIdentifiedObject in org.geotoolkit.referencing.operation.provider

Subclasses of AbstractIdentifiedObject in org.geotoolkit.referencing.operation.provider

class	AbridgedMolodensky The provider for "Abridged Molodensky transformation" (EPSG:9605).
class	Affine The provider for "Affine general parametric transformation" (EPSG:9624).
class	AlbersEqualArea The provider for "Albers Equal Area" projection (EPSG:9822).
class	CassiniSoldner The provider for "Cassini-Soldner" projection (EPSG:9806).
class	CoordinateFrameRotation The provider for "Coordinate Frame Rotation" (EPSG:9607).
class	EllipsoidToGeocentric The provider for "Geographic/geocentric conversions" (EPSG:9602).
class	EquidistantCylindrical The provider for "Equidistant Cylindrical" projection (EPSG:1028, EPSG:1029).
static class	EquidistantCylindrical.Legacy Legacy provider for "Equidistant Cylindrical" projection (EPSG:9842).
static class	EquidistantCylindrical.Spherical Legacy provider for "Equidistant Cylindrical (Spherical)" projection (EPSG:9823).
class	Exponential The provider for ExponentialTransform1D.
class	GeocentricToEllipsoid The provider for "Geographic/geocentric conversions" (EPSG:9602).
class	GeocentricTranslation The provider for "Geocentric translation" (EPSG:9603).
class	HotineObliqueMercator The provider for "Hotine Oblique Mercator" projection (EPSG:9812).
static class	HotineObliqueMercator.TwoPoint The provider for "Hotine Oblique Mercator" projection specified with two points on the central line.
class	Krovak The provider for "Krovak Oblique Conic Conformal" projection (EPSG:9819).
class	LambertAzimuthalEqualArea The provider for "Lambert Azimuthal Equal Area" projection (EPSG:9820, EPSG:1027).
static class	LambertAzimuthalEqualArea.Spherical The provider for "Lambert Azimuthal Equal Area (Spherical)" projection (EPSG:9821).
class	LambertConformal1SP The provider for "Lambert Conic Conformal (1SP)" projection (EPSG:9801).
class	LambertConformal2SP The provider for "Lambert Conic Conformal (2SP)" projection (EPSG:9802).
static class	LambertConformal2SP.Belgium The provider for "Lambert Conic Conformal (2SP Belgium)" projection (EPSG:9803).
static class	LambertConformal2SP.ESRI The provider for "Lambert Conformal Conic" projection.
class	Logarithmic The provider for LogarithmicTransform1D.
class	LongitudeRotation The provider for "Longitude rotation" (EPSG:9601).
class	MapProjection The base provider for map projections.
class	Mercator1SP The provider for "Mercator (1SP)" projection (EPSG:9804, EPSG:1026).
class	Mercator2SP The provider for "Mercator (2SP)" projection (EPSG:9805).
class	MillerCylindrical The provider for "Miller" projection.
class	Molodensky The provider for "Molodensky transformation" (EPSG:9604).
class	NADCON The provider for "North American Datum Conversion" (EPSG:9613).
class	NewZealandMapGrid The provider for "New Zealand Map Grid" (EPSG:9811).
class	NTv2 The provider for "National Transformation" version 2 (ESPG:9615).
class	ObliqueMercator The provider for "Oblique Mercator" projection (EPSG:9815).
static class	ObliqueMercator.TwoPoint The provider for "Oblique Mercator" projection specified with two points on the central line.
class	ObliqueStereographic The provider for "Stereographic" projection using EPSG equations (EPSG:9809).
class	Orthographic The provider for "Orthographic" projection.
class	PlateCarree The provider for "Plate Carrée" projection.
class	PolarStereographic The provider for "Polar Stereographic (Variant A)" projection (EPSG:9810).
static class	PolarStereographic.North The provider for "North Polar Stereographic" projection.
static class	PolarStereographic.South The Provider for "South Polar Stereographic" projection.
static class	PolarStereographic.VariantB The provider for "Polar Stereographic (Variant B)" projection (EPSG:9829).
class	Polyconic The provider for "American Polyconic" projection (EPSG:9818).
class	PositionVector7Param The provider for "Position Vector 7-parameters transformation" (EPSG:9606).
class	PseudoMercator The provider for "Popular Visualisation Pseudo Mercator" projection (EPSG:1024).
class	RGF93 The provider for "France geocentric interpolation" (ESPG:9655).
class	Stereographic The base provider for "Stereographic" projections.
class	TransverseMercator The provider for "Transverse Mercator" projection (EPSG:9807).
static class	TransverseMercator.SouthOrientated The provider for Mercator Transverse (South Orientated) projection (EPSG:9808).